Vision TC-HDMIIPRX/3 Vision HDMI-over-IP Receiver
The TC-HDMIIP/3 converts HDMI signal into TCP/IP packets for transmission over a standard LAN network. With no visible loss of video quality it is perfect for corporate and digital signage applications.Beware of cheap alternatives that flood your network!USB Over NetworkIt can support USB version 1.1 from the transmitter to all receivers. Each receiver has two USB ports for adding flexibility. This is for USB peripherals like keyboard. mice. but not applications that demand high bandwidth like interactive displays. ScalableTransmitters and receivers sold separately so you can scale your system.Advanced EDID CopyA reset button restores EDID to default. or for advanced applications holding either of the reset buttons down will copy the display EDID to the transmitter.One to ManyNeed to display one source on many screens? This product multi-casts. so you can have one transmitter for the source. and over 100 x receivers can sit on the network – one for each display. Only one transmitter per network.Point to Point without LANConnect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 150 m (492 ft) on a high quality cable.Maximum LengthWhen using a LAN the signal will be repeated by each node on the network. resulting in unlimited length.HDFully HDCP 1.4 compliant. it supports resolutions up to 1920 x 1200 @ 60 Hz.AudioDigital audio which is encoded on the HDMI signal is transmitted.IR Pass-ThroughControl the source device from the display with the IR pass-through. An IR blaster and receiver cable is included. and it supports standard 20-60 kHz IR signals.Plug and PlayEDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.H.265 CompressionVideo is compressed using the H.265 protocol. Images are full colour with smooth motion.LAN ProtocolsDespite using the standard IP protocols you don’t need to be a network engineer. All end points must be on the same subnet… that’s all you need to know. For best results use a stand-alone network for this system.Dual-PowerThis product requires a power supply for each transmitter and receiver. It does not use PoE.Unmanaged SwitchMany video-over-IP solutions require a managed switch so that IGMP snooping can be enabled. but in this case no advanced switch setup is required. A low cost unmanaged switch can be used.Multiple SourcesIf you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies. The systems are kept separate and cannot be used as a matrix. A DHCP switch assigns IP addresses to each end point and is used to create the vLANs.Auto StandbyIf the input is shut off the display will be allowed to go to sleep.Not Backward CompatibleThis version uses a Sigmastar chipset and is not compatible with the previous v2 product which uses a HiSilicon chipset.
Price now:
From
£113.94
To
£139.46
Price History:
Details:Vision TC-HDMIIPRX/3 Vision HDMI-over-IP Receiver
The TC-HDMIIP/3 converts HDMI signal into TCP/IP packets for transmission over a standard LAN network. With no visible loss of video quality it is perfect for corporate and digital signage applications.Beware of cheap alternatives that flood your network!USB Over NetworkIt can support USB version 1.1 from the transmitter to all receivers. Each receiver has two USB ports for adding flexibility. This is for USB peripherals like keyboard. mice. but not applications that demand high bandwidth like interactive displays. ScalableTransmitters and receivers sold separately so you can scale your system.Advanced EDID CopyA reset button restores EDID to default. or for advanced applications holding either of the reset buttons down will copy the display EDID to the transmitter.One to ManyNeed to display one source on many screens? This product multi-casts. so you can have one transmitter for the source. and over 100 x receivers can sit on the network – one for each display. Only one transmitter per network.Point to Point without LANConnect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 150 m (492 ft) on a high quality cable.Maximum LengthWhen using a LAN the signal will be repeated by each node on the network. resulting in unlimited length.HDFully HDCP 1.4 compliant. it supports resolutions up to 1920 x 1200 @ 60 Hz.AudioDigital audio which is encoded on the HDMI signal is transmitted.IR Pass-ThroughControl the source device from the display with the IR pass-through. An IR blaster and receiver cable is included. and it supports standard 20-60 kHz IR signals.Plug and PlayEDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.H.265 CompressionVideo is compressed using the H.265 protocol. Images are full colour with smooth motion.LAN ProtocolsDespite using the standard IP protocols you don’t need to be a network engineer. All end points must be on the same subnet… that’s all you need to know. For best results use a stand-alone network for this system.Dual-PowerThis product requires a power supply for each transmitter and receiver. It does not use PoE.Unmanaged SwitchMany video-over-IP solutions require a managed switch so that IGMP snooping can be enabled. but in this case no advanced switch setup is required. A low cost unmanaged switch can be used.Multiple SourcesIf you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies. The systems are kept separate and cannot be used as a matrix. A DHCP switch assigns IP addresses to each end point and is used to create the vLANs.Auto StandbyIf the input is shut off the display will be allowed to go to sleep.Not Backward CompatibleThis version uses a Sigmastar chipset and is not compatible with the previous v2 product which uses a HiSilicon chipset.
Price now:
From
£113.94
To
£139.46
This site contains affiliate links for which we may be compensated.
PcNova.co.uk
0.96% (+ £1.08)
New
£113.94
£157.24
PcNova.co.uk | £113.94Free Delivery | Store |
GamingKit | £139.46Free Delivery | Store |
Currently Unavailable
Product Description
The TC-HDMIIP/3 converts HDMI signal into TCP/IP packets for transmission over a standard LAN network. With no visible loss of video quality it is perfect for corporate and digital signage applications.Beware of cheap alternatives that flood your network!USB Over NetworkIt can support USB version 1.1 from the transmitter to all receivers. Each receiver has two USB ports for adding flexibility. This is for USB peripherals like keyboard. mice. but not applications that demand high bandwidth like interactive displays. ScalableTransmitters and receivers sold separately so you can scale your system.Advanced EDID CopyA reset button restores EDID to default. or for advanced applications holding either of the reset buttons down will copy the display EDID to the transmitter.One to ManyNeed to display one source on many screens? This product multi-casts. so you can have one transmitter for the source. and over 100 x receivers can sit on the network – one for each display. Only one transmitter per network.Point to Point without LANConnect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 150 m (492 ft) on a high quality cable.Maximum LengthWhen using a LAN the signal will be repeated by each node on the network. resulting in unlimited length.HDFully HDCP 1.4 compliant. it supports resolutions up to 1920 x 1200 @ 60 Hz.AudioDigital audio which is encoded on the HDMI signal is transmitted.IR Pass-ThroughControl the source device from the display with the IR pass-through. An IR blaster and receiver cable is included. and it supports standard 20-60 kHz IR signals.Plug and PlayEDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.H.265 CompressionVideo is compressed using the H.265 protocol. Images are full colour with smooth motion.LAN ProtocolsDespite using the standard IP protocols you don’t need to be a network engineer. All end points must be on the same subnet… that’s all you need to know. For best results use a stand-alone network for this system.Dual-PowerThis product requires a power supply for each transmitter and receiver. It does not use PoE.Unmanaged SwitchMany video-over-IP solutions require a managed switch so that IGMP snooping can be enabled. but in this case no advanced switch setup is required. A low cost unmanaged switch can be used.Multiple SourcesIf you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies. The systems are kept separate and cannot be used as a matrix. A DHCP switch assigns IP addresses to each end point and is used to create the vLANs.Auto StandbyIf the input is shut off the display will be allowed to go to sleep.Not Backward CompatibleThis version uses a Sigmastar chipset and is not compatible with the previous v2 product which uses a HiSilicon chipset.
Product Specifications
General | |
|---|---|
Color | black |
Size | 1.1 |
Brand | Vision |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.